Changing The Light Bulb - Westinghouse WIM1000 User Manual

LAMp REpLACEMENT
LAMp REpLACEMENT FOR MODELS WIM1200,
WRM1300, WRM2400
The reversing of doors or replacement of light bulbs is
not covered by warranty . Assistance, if required can be
arranged by calling our service centre on 13 13 49 .
Normal service call and labour charges apply .
1 . Switch off the power at the power point and remove the
cord by pulling the plug .
2 . Remove the screw from the centre of the control panel .
3 . Remove the light lens by pushing back and down on the
clear plastic tab protruding from the bottom of the lens .
4 . Unscrew the spent light bulb in an anti-clockwise
direction .
5 . Screw the replacement bulb into the socket in a
clockwise direction .
6 . Replace the light lens and screw .
7 . Wait 5 minutes to ensure pressures in the refrigeration
system are equalised, before turning the refrigerator on
at the power point .
WARNING
Never insert your finger into the light bulb socket.
LAMp REpLACEMENT FOR MODEL WIM1000
1 . Switch off the power at the power point and remove the
cord by pulling the plug .
2 . Slide out the drip tray from beneath the ice box .
3 . Unscrew the light bulb in an anti-clockwise direction .
4 . Screw the replacement bulb into the socket in a
clockwise direction .
6 . Replace the drip tray .
7 . Wait 5 minutes to ensure pressures in the refrigeration
system are equalised, before turning the refrigerator on
at the power point .
WARNING
Never insert your finger into the light bulb socket.
TIPS & INFORMATION
Not all 15 watt screw-in lamps will fit the lamp housing .
Appropriate replacement lamps can be purchased from
Electrolux or by calling 13 13 50.