Initial Start-Up; Manual Controls; Controlling The Temperature - Westinghouse WIM1000 User Manual

Bar fridges with ice box, all refrigerators and upright freezers
Hide thumbs Also See for WIM1000:
Table of Contents

Advertisement

INITIAL START-Up

INITIAL START-Up
This series of refrigerators has been fitted with a 'wet wall'
evaporator which is positioned behind the rear liner . The
rear liner will, at times be wet or appear frosted . This is
normal and demonstrates that the refrigerator is functioning
correctly . This product is designed to operate on a power
supply of 220/240 volts 50Hz . Connect to a separate
power point with a correctly earthed three pin socket . Do
not use double adaptors .
CONTROLLING THE TEMpERATURE IN YOUR REFRIGERATOR
Refrigerators work by transferring heat from the food inside
to the outside air . This operation makes the back and sides
of the refrigerator (particularly at start-up) feel warm – which
is normal . Make sure you fully close the refrigerator door
after loading or removing food . If the door is left partially
open, a heavy frost will coat the inside of the ice box .
Ensure shelves are pushed back completely to prevent them
holding the door open . If the unit is unplugged, power lost
or turned off, you must wait 3 to 5 minutes before restarting
the unit . If you attempt to restart the unit before this time
delay, the refrigerator will not start .
When the thermostat is turned to it's lowest setting and past
the point of resistance, the appliance will not operate .
WARNING
Power is still supplied to the appliance
To make the appliance operate you must turn the knob
clockwise .
For all models, 'Less Cold' corresponds to the warmest
temperature while 'Colder' the coldest .
The temperatures in the 2 compartments of the refrigerator
cannot be adjusted separately (this refers to WIM1000,
WIM1200) .
When the ambient room temperature is 16°C, a setting
of half way between 'Less Cold' and 'Mid' would be
appropriate .
When the ambient room temperature is 25°C, a setting of
half way between 'Mid' and 'Colder' could be selected .
Mid
Colder
Models WIM1200, WRM1300
and WRM2400
Mid
Less Cold
Model WIM1000
When you change temperature settings, make small
adjustments and wait 24 hours before assessing whether
you need to make further changes .
Less Cold
Colder

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrm2400Wfm0700Wim1200Wfm0900Wfm1800Wrm1300

Table of Contents