Changing The Light Bulb; How To Use The Features Of Your Refrigerator - Westinghouse DEO-Fresh WTB2300WB User Manual

Top mount refrigerator
Table of Contents

Advertisement

CHANGING THE LIGHT bULb

REFRIGERATOR
1. Switch off the power at the power
point and remove the refrigerator's
power cord from the power point.
2. Remove shelves and chiller
compartment.
3. Carefully unclip the light cover by
pulling the top of the cover towards you.
4. Unscrew the light bulb and replace it
with a bulb that is the same wattage
and type as the original.
If, when you remove the light bulb the
small rubber "O" ring comes out with
the bulb, fit the "O" ring over the new
bulb and screw bulb into the socket (see
diagram at bottom of page).
Never insert your finger into the light bulb socket to
warning
check for the presence of the "O" ring.
5. Replace the light cover.
6. Replace shelves and chiller compartment.
7. Wait 5 minutes to ensure pressure in the refrigeration
system are equalised. Then turn the refrigerator on at the
power point.
FREEzER (where fitted)
1. Switch off the power at the power
point and remove the refrigerator's
power cord from the power point.
2. Carefully unclip the light cover by pulling
the top of the cover towards you.
3. Unscrew the light bulb and replace it
with a bulb that is the same wattage
and type as the original.
If, when you remove the light bulb the
small rubber "O" ring comes out with
the bulb, fit the "O" ring over the new
bulb and screw bulb into the socket (see
diagram at bottom of page).
Never insert your finger into the light bulb socket to
warning
check for the presence of the "O" ring.
4. Replace the light cover.
5. Wait 5 minutes to ensure pressure in the refrigeration
system are equalised.Then turn the refrigerator on at
the power point.
TIPS & INFORMATION
Ensure the 'O' ring is in place before replacing the bulb.
Light socket
"O" ring
HOw TO USE THE FEATURES OF YOUR
REFRIGERATOR
This section tells you how to make the most of the
refrigerator's many useful features and how to clean them.
Door Storage bins (shelves)
Both the refrigerator and freezer have door storage bins.
You can adjust the refrigerator bins to meet different storage
needs. All the door bins are completely removable for
cleaning. If you want to remove or adjust a bin, lift and tilt
to remove. To replace, fit top and push bin down until the
support lugs lock it in place.
Store Safe Compartment (where fitted)
You can use this compartment to store food and other items.
To operate lock, push up to open and down to lock.
CRISPER bIN
Storing Vegetables
You can use the crisper bin to store vegetables, fruits or
small goods. You can change the humidity inside the bin by
rotating the humidity control. You should store vegetables in
the crisper bin, but remember to set the humidity control to
more humid (vent closed).
Storing Fruits & Small Goods
You can also store fruits in the crisper bin, but remember to
set the humidity control to less humid (vent open).
Chiller (where fitted)
The chiller allows you to store perishable food longer and
is useful for the fast chilling of food and drinks. However,
items may freeze if left near the vents. To prevent freezing,
move items away from the vents after chilling.
Deodoriser
Your appliance is fitted with a catalysing deodoriser to
assist with the removal of the food odours inside your
refrigerator and freezer. Keeping food covered and
wrapping food with plastic wrap will also help to reduce
the odours inside your appliance.
Light bulb
7

Advertisement

Table of Contents
loading

Table of Contents