Reversing The Ice Box Door Opening Direction - Westinghouse WIM1000 User Manual

REvERSING ICE BOX DOOR OpENING DIRECTION –
MODEL WIM1200 ONLY
If the position your fridge occupies would be better suited
to a reverse opening arrangement, carefully follow these
diagrams and instructions . The reversing of doors or
replacement of light bulbs is not covered by warranty .
Assistance, if required can be arranged by calling our
service centre on 13 13 49 . Normal service call and
labour charges apply .
pRECAUTIONS
• Turn off the appliance
• Unplug the power cable
Push a flat bladed screwdriver up into the slot at the angle
illustrated to release the plastic pin securing the ice box
door . At the same time, pull the ice box door forward to
release both the door and the pin from the ice box .
Rotate the door for reverse opening .
Remove plug to open shaft for pin to go in .
Insert plug into the empty pin cavity on the other side .
Insert the node on the top of the door into the hinging hole
in the top of the fridge liner .
With the plastic pin pushed onto the bottom node on the
ice box door and held in place, push the pin into the hole
on the ice box frame until the clasp on the pin locks it into
position .
13