Reversing The Door Opening Direction Wim1000 & Wfm0700 - Westinghouse WIM1000 User Manual

DOOR REvERSAL
REvERSING THE DOOR OpENING DIRECTION
WIM1000 & WFM0700
In these examples the operation is changed from right side
hinging to left side hinging .
pRECAUTIONS
• Turn off the appliance
• Unplug the power cable
• Remove all food from the appliance
• Remove shelves and baskets
• Do not lay the appliance down flat on its back as this will
impair its operation .
• When tilting the appliance to access the underside,
support it so that it will not fall to the floor .
Right sided hinging assembly
2
1
Left sided hinging assembly
Note: All parts removed must be retained to reinstall door .
7
2
1
3
6
5
3
• Support the door from below and remove the two screws
(1) that secure the hinge (2) to the bottom right side of the
appliance . Stand the door to one side carefully .
• Unscrew the left front leg (3) and transfer it to the
right side .
• Remove the metal hinging pin (6) and the spring (5)
beneath it from the hole in the top right hand corner of
the door .
• Insert the spring (5) first and then the pin (6) – previously
removed from the right hand side – into the top left hole .
• Position the door on the cabinet with the pin (6)
protruding from the top left corner entering the
corresponding hole (arrowed in left hinging assembly
illustration) under the top frame of the cabinet .
6
• While holding the door in the closed position, secure the
5
hinge (2) – previously removed from the other side – onto
the bottom left corner, tightening the 2 screws (1) firmly .
7