Using Your Cooktop - Fisher & Paykel CG604DX User Manual

Using your cooktop

6
High
Burner
indicator
Identify the dial of the burner you want to
1
use.
High
After the burner has lit, keep the dial held
3
down for 3 more seconds (a), then release.
You may now adjust the flame
anywhere between High and Low (b).
Do not adjust or leave the dial
between High and off (
Important!
Turn the burner off (
There's a strong gas smell.
The flame has been blown out by a draught or
extinguished by a spill.
There is no clicking/sparking or there is clicking/
sparking, but a burner or burners won't light.
The flames don't burn all the way around a
burner, or some flames flicker.
Off
Low
3 secs
a
b
Low
o
).
o
) and see 'Troubleshooting' for what to do next if you experience any of the following:
High
Press down (a) then turn anti‐clockwise to High (b).
2
The ignitors will start clicking as they
spark.
If there is no clicking, there is no spark
to light the burner. If the burner fails to
light turn the dial back to off (
'Troubleshooting' .
When you have finished cooking, turn the dial
4
clockwise back to off (
Check that the burner has gone out.
Before leaving the kitchen, check that all
burners have been turned off.
The flame goes out when you release the dial
3 seconds after lighting.
The flame is yellow or yellow‐tipped rather
than blue.
The flames are too large, small, irregular,
noisy or lift away from the burner.
a
b
o
) and see
o
).