Error Messages - Pentax EPK-P Owner's Manual

Error Messages

Message
Please replace the lamp 1
Please replace the lamp 2
Please switch the lamp
Scope is not Connected
Connected Scope is not
Compatible with this Processor
Please Contact with your
Distributor
Scope Communication Error
W/B Failed Please Retry
Lamp Error
Please close Lamp Door
Lamp Switching Error
Meaning
The lamp is not lit.
The lamp has gone out during use.
The scope is not attached.
The scope is not compatible.
Communication with the scope failed. Reattach the scope.
The white balance is incorrect.
The lamp housing cover is open.
Lamp is not positioned correctly.
Solution
Replace lamp 1 or lamp 2.
Switch to the spare lamp.
Attach the scope.
Use a K-series scope.
Set the white balance again.
Close the lamp housing cover.
Open the lamp housing cover and
check the harnesses are attached
correctly.
Troubleshooting
Reference
Page
P.25
P.44
P.18
P.18
P.50
P.18
P.27
P.44
P.44 - 45
6
49