Pentax EPK-P Owner's Manual page 45

5
Unlock the mounting plate first, and then pinch and
pull out the slide plate for lamp mounting. (Refer to
Figure 5.4)
(If it is difficult to pull out the slide plate for lamp
mounting, rotate the lamp replacement base with
your fingers and try pulling out the slide plate again.)
6
Hold the socket holder and pull it out toward you to
remove it from the slide plate for lamp mounting.
(Refer to Figure 5.5)
7
Remove the lamp from the socket holder. (Refer to
Figure 5.6)
8
Connect a new lamp to the socket holder.
9
Insert the socket holder into the slide plate for lamp
mounting, and then push in until it is attached.
10
Reattach the lamp housing cover and turn the screw
at the top of the cover clockwise.
1
Slide Plate for Lamp Mounting
Figure 5.4
Figure 5.5
Figure 5.6
Maintenance and Storage
Mounting Plate
2
5
Socket Holder
45