Table 7: Basic Settings - Grandstream Networks HT502 User Manual

T 7: B S
ABLE ASIC ETTINGS
End User Password
Web Port
Telnet Server
IP Address
DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Time Zone
Self Defined Time Zone
Language
Device Mode
NAT Maximum Ports
Grandstream Networks, Inc.
Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
Default is set to YES.
There are two modes to operate the HT502:
DHCP mode: all the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.) The HT502 acquires its IP address from the first
DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the
PPPoE account settings. The HT502 will establish a PPPoE session if any of the PPPoE
fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero by
default.
Default is blank. This option specifies the name of the client. This field is optional but may
be required by some Internet Service Providers.
Default is blank. This option specifies the domain name that client should use when
resolving hostnames via the Domain Name System.
Default is HT500. Used by clients and servers to exchange vendor-specific information..
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection.
PPPoE account password.
Default is blank. This field is optional. If your ISP uses a service name for the PPPoE
connection, enter the service name here.
Controls how the date/time is displayed according to the specified time zone.
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
Time zone with 6 hours offset with 1 hour ahead which is the US central time. It is positive
(+) if the local time zone is west of the Prime Meridian and negative (-) if it is east.
Prime Meridian (a.k.a: International or Greenwich Meridian)
M3.2.0,M11.1.0
st
The 1 number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
nd
The 2 number indicates the n
rd
The 3 number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of March to the
1st Sunday of November.
Languages supported with voice prompt and web interface, except Spanish that it is only
in IVR.
This parameter controls whether the device is working in NAT router mode or Bridge
mode. Save the setting and reboot prior to configuring HT502.
The number of ports that can be managed while in NAT router mode.
Range: 0 – 4096, default is 1024. Typically one port per connection.
HT-502 User Manual
Firmware Version 1.0.4.2
th
iteration of the weekday: (1st Sunday, 3rd Tuesday etc)
Page 17 of 32
Last Updated: 06/2011