Basic Settings Page Definitions; Table 7: Basic Settings Page - Grandstream Networks HT801 Administration Manual

Displays relevant information regarding the FXS port about its registration, DND and
Port Status
call forward features.
Port Options Displays relevant information regarding the FXS port about its DND and call forward
features.
Provision Displays provisioning status.
Provides generated core dump file if unit malfunctions.
Core Dump
Clean will be displayed if no issues.
GR909 Click on "Test Page" to be redirected to lines tests page (Hazardous Potential, Foreign
Electromotive Forces, Resistive Faults, Receiver Off hook and Ringer Equivalent
Number)

Basic Settings Page Definitions

Basic Settings
New End User Configures user level password. Case sensitive and max. length of 25 characters.
Password
Confirm End User
Re-enter the end user password to confirm change user password on web GUI to avoid
Password
typo or mistakes.
Web Port Customizes HTTP port used to access the HT801 web UI. Default is 80.
Telnet Server Enables / Disables access via telnet. Default is Yes (activated).
IP Address Specifies IP Address to use on HT801.There are three modes to operate the HT801:
DHCP hostname Specifies the name of the client. The name may or may not be qualified with the local
domain name. This field is optional but may be required by ISP.

Table 7: Basic Settings Page


DHCP mode: all the field values for the static IP mode are not used (even
though they are still saved in the flash memory.) The HT801 acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.

Use PPPoE: set the PPPoE account settings. If selected, HT801 attempt to
establish a PPPoE session if any of the PPPoE fields is set.

Static IP mode: configure IP address, subnet Mask, default router IP
address, 1st preferred DNS server, 2nd preferred DNS server. These fields
are set to zero by default.
HT801 Administration Guide
P a g e | 20