Table 1: Definitions Of The Table 2: Definitions Of The; Ht502 User Manual; Iagram; Ht502 Connectors - Grandstream Networks HT502 User Manual

T 1: D
ABLE EFINITIONS OF THE
Power Cable
WAN Port (RJ-45)
LAN Port (RJ-45)
RESET
PHONE1 (RJ-11)
PHONE2 (RJ-11)
There are five (5) LED buttons that help you manage the status of your HandyTone.
T 2: D
ABLE EFINITIONS OF THE
LEDs
POWER LED
WAN LED
LAN LED
PHONE1 / PHONE2 LED
NOTE: All LEDs display green when ON. Slow blinking of WAN and LAN LED together indicate the
product in firmware upgrading or provision stat
Figure 2: HT502 Connection Diagram
Analog Phone
Cordless
Phone
Fax
z
Grandstream Networks, Inc.
HT502 C
ONNECTORS
Power adapter connection
Connect to the internal LAN network or router.
Connect the LAN port with an Ethernet cable to your PC.
Factory Reset button. Press for 7 seconds to reset factory default settings.
FXS port to be connected to analog phones / fax machines.
FXS port to be connected to analog phones / fax machines.
HT502 LED
S
Indicates Power. Remains ON when power is connected
Indicates LAN (or WAN) port activity
Indicates PC (or LAN) port activity
Indicate status of the respective FXS Ports-PHONE1 /
PHONE2 on the back panel
Busy – ON (Solid Green)
Available – OFF
Slow blinking FXS LEDs indicates voicemail for that port.
e.
Modem Ethernet
FXS
HT-502 User Manual
Firmware Version 1.0.4.2
Internet
ADSL/Cable
WAN
FXS
LAN
Analog Phone
Cordless
Phone
Fax
Page 6 of 32
Last Updated: 06/2011