Assignment; Create New Device; Figure 21: Assign Extension To Device; Figure 22: Create New Device - Grandstream Networks UCM6102 User Manual

ASSIGNMENT

In the discovered list, click on to open the edit dialog to assign an extension to this device.

Figure 21: Assign Extension To Device

After saving the edit dialog, the XML config file will be generated in the UCM61xx. Reboot the phone to
trigger the phone to download the config file.

CREATE NEW DEVICE

Users could also directly create a new device and assign the extension before the device is discovered by
the UCM61xx. Once the device is plugged in, it can then be discovered and get provisioned by the
UCM61xx.
Click on "Create New Device" and the following dialog will show. Fill in the MAC address or IP address, and
then select the extension to assign to the device. Click on "Save" to add the device to the provision list.

Figure 22: Create New Device

Firmware Version 1.0.1.22 UCM6102/6104/6108/6116 USER MANUAL Page 45 of 138