Speedcook - AEG Electrolux E8931-5 User Manual

Speedcook indicator
When the Speedcook function has been
switched on, the bars that flash one after
the other indicate that fast heating is
working.
Residual heat indicator
When the oven function has been
switched off, the bars that are still lit indi-
cate the remaining residual heat in the ov-
en.

Speedcook

After an oven function is selected, with the use of the additional function
Speedcook
Important: Do not put the food to be cooked into the oven, until Speedcook is
completed and the oven is operating using the desired function.
1. Set the desired oven function (e. g. Conventional
suggested temperature.
2. Press the Speedcook
The bars flashing one after another show that Speedcook is operating.
When the temperature set is reached, the bars of the heat indicator light up. An
audible signal sounds. The symbol
The oven now continues heating according to the pre-set oven function and
temperature. You can now place the food in the oven.
The Speedcook
vection with ring heating element
Rotitherm
the empty oven can be pre-heated in a relatively short time.
button. The symbol
function can be switched on with the oven functions Con-
.
). If necessary, change the
lights up:
goes out.
, Pizza setting , Conventional
Using the Oven
and
19