Setting The Heat Setting; Cooking With The Automatic Warm Up Function - AEG Electrolux E8931-5 User Manual

14 Using the Rings

Setting the heat setting

1. Switch on the appliance with the On/Off
2. When getting up to heat/searing food, se-
lect a high heat setting.
3. To end the cooking process, turn back to
the Off position.
The respective ring switch and the corre-
sponding pilot light are lit while the ring is
operating.

Cooking with the automatic warm up function

When cooking with the automatic warm up function, the cooking zone works
with full power for a certain amount of time and then switches back to the heat
setting set to continue cooking.
1. To switch on the automatic warm up period, turn the ring switch clockwise as
far as it will go.
2. Then turn the ring switch back to the desired heat setting for the continuing
cooking period.
3. To end the cooking process, turn back to the "O" position.
If you select a higher heat setting during the warming up time, e. g. turning
from "3" up to "6", the time that has already elapsed for the warming up period
is taken into consideration. If you select a lower heat setting, the warm up peri-
od will end immediately.
You can end the automatic warm up function early by turning the ring switch
back to the Off position and then setting the required heat setting for the con-
tinuing cooking period again.
button.