Speedcook - AEG Electrolux COMPETENCE B5741-4 User Information

Fast heat indicator
When the fast heat function has
been switched on
that flash one after the other indi-
cate that fast heat is operating. In
addition the bars next to the
symbol
Residual heat indicator
When the oven has been switched
off, the bars that are still lit indicate
the remaining residual heat in the
oven.

Speedcook

After an oven function is selected, with the use of the additional
function Speedcook
tively short time.
1
Important: Do not put the food to be cooked into the oven, until
Speedcook is completed and the oven is operating using the desired
function.
1. Set the desired oven function (e. g. Conventional Cooking
sary, change the suggested temperature.
2. Press the Speedcook
up.
When the bars flash one after another it shows that Speedcook is oper-
ating.
When the temperature set is reached, the bars of the heat indicator
light up and the bars next to the symbol
nal sounds.
The oven now continues heating according to the pre-set oven func-
tion and temperature. You can now place the food in the oven.
3
The Speedcook function can be switched on with the oven functions
Ventitherm ® Precision Fan Cooking
Cooking
14
the bars
light up.
the empty oven can be pre-heated in a rela-
button. The bars next to the symbol
and Rotitherm Roasting
go out. An audible sig-
, Pizza Setting
.
). If neces-
light
, Conventional