Manual Feed - Grizzly G0745 Owner's Manual

Manual feed

the handwheels shown in figure 31 allow the
operator to manually move the cutting tool.
Cross slide
handwheel
handwheel
figure 31. Manual handwheel controls.
-28-
Carriage
Carriage Handwheel
use the carriage handwheel to move the carriage
left or right along the bed when setting up and
performing turning operations.
Cross Slide Handwheel
Graduated Dial
increments ............................... 0.002" (0.051mm)
one Full revolution ................... 0.056" (1.42mm)
use this handwheel to move the tool toward and
away from the work. the cross slide handwheel
has an indirect-read graduated dial. this means
the distance shown on the scale represents the
actual distance the tool moves.
Model G0745 (Mfg. Since 11/13)