Backlights And Indicators; Status Leds; System Status Led; Alpha Mode Status Led - Honeywell MX7 Tecton User Manual

Backlights and Indicators

Status LEDs

The MX7 Tecton System Status LED is located at the top left of the keypad, below the F3 key. The Alpha Mode LED is located
below the F4 key on the 32-key keypad.
LEDs (Light Emitting Diodes) are located on the front of the MX7 Tecton. They are:
1. System Status LED indicates power management status.
2. Alpha Mode Status LED applies to the 32-key keypad only.

System Status LED

Blinking Red
Steady Red
Blinking Green
Yellow / Amber
No Color

Alpha mode Status LED

Steady Green
No Color

Scan Status

An oval indicator situated below the keypad and next to the On button.
Steady Green
Steady Amber
Steady Red
No Color
Battery power fail; critical suspend mode
Main battery low
Display turned off
A few seconds when Power key is pressed
No user intervention required.
Device is in "Alpha" character input mode
Device is in "Numeric" key input mode
Good scan
Decoder engine storing changed parameters
Scan in progress
Scanner / Imager ready for use or no scanner installed.
2-5