Charge Or Recharge The Main Battery - Honeywell MX7 Tecton User Manual

Charge or Recharge the Main Battery

Warning. Only use Honeywell batteries as replacements: MX7A380BATT / MX7392BATT or a Low Temperature (CS) Battery :
MX7A381BATT / MX7393BATT / MX7396BATTERY
Note: The MX7 Tecton Battery Charger is designed for an indoor, protected environment.
New batteries must be fully charged prior to use.
The main battery can be recharged in an AC powered Battery Charger after the battery has been removed from the MX7 Tecton
or its packing material when new.
The main battery while in the MX7 Tecton can be recharged using several different methods.
Note: An external power source is required before the main battery in the MX7 Tecton will recharge.
The main battery can be recharged while it is in the MX7 Tecton:
by connecting the MX7 Tecton AC power adapter to the I/O connector at the base of the MX7 Tecton.
l
by docking the MX7 Tecton in a powered desk cradle
l
by docking the MX7 Tecton in a powered vehicle cradle
l
or by connecting the car power adapter (CLA) to the I/O connector at the base of the MX7 Tecton.
l
Note: An uninterrupted external power source (wall AC adapters) transfers power to the computer's internal charging
circuitry which, in turn, recharges the main battery and internal battery. Frequent connection to an external power
source, if feasible, is recommended to maintain internal battery charge status as the internal battery cannot be
recharged by a dead or missing main battery.
2-4