Chapter 2: Set Up A New Mx7 Tecton; Hardware Setup; Software Setup - Honeywell MX7 Tecton User Manual

Chapter 2: Set Up A New MX7 Tecton

This page lists a quick outline of the steps you might take when setting up a new MX7 Tecton. More instruction for each step is
listed later in this guide. Please refer to the MX7 Tecton Reference Guide for additional information and instruction.
Contact Technical Assistance
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the MX7 Tecton, and components from electrostatic discharge.

Hardware Setup

1. Connect accessories.
2. Connect cables.
3. Insert/connect a fully charged battery
4. Press the Power key.

Software Setup

Hardware setup should be completed before starting software setup.
1. Calibrate Touch screen
2. Set Date and Time Zone
3. Set Power Schemes Timers
4. Set Speaker Volume
5. Pair Bluetooth devices
6. Setup Wireless client parameters
7. Setup terminal emulation
8. Setup the AppLock parameters
9. Set the DCWedge parameters
Please refer to the MX7 Tecton Reference Guide for additional information and instruction.
if you need additional help.
parameters
2-1