Connecting The Serial And Power Cable - Honeywell MX7 Tecton User Manual

Hand-held computer
Hide thumbs Also See for MX7 Tecton:
Table of Contents

Advertisement

Connecting the Serial and Power Cable

Note:
AC/DC Adapter must be assembled before this procedure begins.
Note:
Do not connect AC power to the AC Adapter yet.
1. Holding the cable I/O connector, squeeze the catch release buttons in until the catches are open. Connect the cable to
the MX7 Tecton I/O port by matching the shape of the I/O connector on the cable with the shape of the I/O connector at
the base of the MX7 Tecton. Release the catch release buttons.
2. Connect the AC adapter single pin cable .
3. Connect the assembled AC/DC Adapter to a power source (wall outlet).
4. Connect the RS232 cable end to the desired serial device. Turn the thumbscrews clockwise until the connection is
finger-tight.
The MX7 Tecton and the serial device are connected.
3-2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents