ATEN KL1508Ai User Manual page 56

KL1508Ai / KL1516Ai User Manual
(Continued from previous page.)
Setting
SET QUICK This function lets the administrator select which ports to include as
VIEW PORTS Quick View ports.
To select/deselect a port as a Quick View Port, use the navigation
keys to move the highlight bar to it, then press the [Spacebar].
When a port has been selected as a Quick View Port, an arrowhead
displays in the QV column of the LIST on the Main Screen to
indicate so. When a port is deselected, the arrowhead disappears.
If one of the Quick View options is chosen for the LIST view (see
F2: LIST, page 39), only a port that has been selected here will
display on the List.
If one of the Quick View options is chosen for Auto Scanning (see
SCAN/SKIP MODE, page 41), only a port that has been selected
here will be Auto Scanned.
The default is for no ports to be selected.
PREFERRED This function allows you to set the preferred resolution for a second
RESOLUTION external display* connected to the switches console port, which will be
sent to the KVM adapter cables. The KVM adapter cables provide the
connected computer's video card with EDID information about the
monitor connected to the switch. This affects the video quality
displaying on the external console monitor. Choices are:
MONITOR DEFAULT SETTING
provided by the switches LCD monitor
Alternative Resolution
information) selected for the external display connected to the
switches console port, to the KVM adapter cables. Select a
resolution that best suits the video display for the monitor connected
to the switches console port.
Note: When using the built in LCD monitor the default resolution must
be set to 1280x1024 60HZ. Only change the preferred resolution
when connecting an external display to the console monitor port.
TOUCHPAD Enables / Disables the touchpad function of the console. Choices are
Y (for Yes), or N (for No). The active status (Touchpad On / Touchpad
Off) is also shown.
42
Function
–
Sends the EDID information
–
to the KVM adapter cable.
–
Sends the alternative resolution (EDID