ATEN KL1508Ai User Manual page 124

KL1508Ai / KL1516Ai User Manual
Setting
ID Duration
Scan Duration
Screen Blanker
Logout Timeout
Viewer*
Welcome
Message*
Save
* This item is only available with the Browser version.
110
Determines how long a Port ID displays on the monitor after a port
change has taken place. You can choose an amount from 1—255
seconds. The default is 3 Seconds. A setting of 0 (zero) means
the Port ID is always on.
Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see Auto
Scanning, page 171). Key in a value from 1—255 seconds. The
default is 5 seconds; a setting of 0 disables the Scan function.
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1—30
minutes. A setting of 0 disables this function. The default is 0
(disabled).
Note: Although this function can be set from either the local
console or a remote login, it only affects the local console monitor.
If there is no user input for the amount of time set with this
function, the user is automatically logged out. A login is necessary
before the KL1508Ai / KL1516Ai can be accessed again.
You can choose which viewer is used when accessing a server:
Auto Detect will select the appropriate viewer based on the
web browser used; WinClient for Windows Internet Explorer,
Java Client for other web browsers (ex. Firefox).
Java Client will open the Java based viewer regardless of the
web browser being used.
You can choose to hide or show the welcome message displayed
in the submenu bar. The default is disabled.
Click Save to save any changes made to the User Preferences
settings.
Function