ATEN KL1508Ai User Manual page 226

KL1508Ai / KL1516Ai User Manual
2. Attach the left and right easy-installation mounting rails to the inside of
the rack. The flange that supports the switch will be to the inside.
Front Flange
a) Screw the front flanges to the rack first.
b) Slide the bars with the rear flanges toward the rack until the flanges
make contact with the rack, then screw the rear flanges to the rack.
212
Slide Bar
LEFT
Support
RAIL Flange
RIGHT
RAIL
Rear Flange
Rear Attachment
Sliding Bracket