ATEN KL1508Ai User Manual page 138

KL1508Ai / KL1516Ai User Manual
General
The General section of the Device Management page displays the name of the
selected device, its firmware version, and information about its network
configuration.
Note: The AP GUI version presents the same information as the Browser
version. Scroll through the list to see the additional entries.
Device Setting
The lower panel presents information concerning the device's settings, as
described , below:
Use Occupy Timeout Mode to set a time threshold for users on ports whose
Operation Mode has been set to Occupy (See Port Configuration,
page 142). If there is no activity from the user occupying the port for the
amount of time set here, the user is timed out and keyboard and mouse
control on the port is released, after which the first user to send keyboard
or mouse input will occupy the port. However, the user originally
connected to the port will still see the port's video output. The default is 3
minutes.
Use Local Keyboard Language to select the language for the local
keyboard from the drop-down menu. The default is English (US).
Preferred Resolution allows you to set the preferred resolution for an
external display connected to the switches console port, which will be sent
to the KVM adapter cables. The KVM adapter cables provide the
connected computer's video card with EDID information about the
monitor connected to the switch. This affects the video quality displayed
on the external console monitor.
Monitor Default Settings: Sends the EDID information provided by the
switches LCD monitor – to the KVM adapter cable.
Alternative Resolution: Sends the alternative resolution (EDID
information) selected for the external display connected to the switches
console port – to the KVM adapter cables. Select a resolution that best
suits the video display for the monitor connected to the switches
console port.
Turns the Beeper on or off.
If Force all to grayscale is enabled, the remote displays of all devices
connected to the KL1508Ai / KL1516Ai are changed to grayscale. This
can speed up I/O transfer in low bandwidth situations.
124