ATEN KL1508Ai User Manual page 55

Setting
SCAN/SKIP Selects which computers will be accessed under Skip mode (see F5:
MODE SKP, page 46), and Auto Scan mode (see F7: SCAN, page 48).
Choices are:
ALL
QUICK VIEW
have been selected as Quick View Ports (see SET QUICK VIEW
PORTS, page 42);
POWERED ON
and are Powered On;
QUICK VIEW + POWERED ON
set Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
SCREEN If there is no input from the console for the amount of time set with this
BLANKER function, the screen is blanked. Key in a value from 1–30 minutes, then
press [Enter]. A setting of 0 disables this function. The default is Off.
HOTKEY Enables / Disables the Hotkey function (see OSD Operation, page 35),
COMMAND in case a conflict with programs running on the computers occurs. The
MODE default is On.
HOTKEY This setting selects the Hotkey invocation keys (see Hotkey Operation,
page 49). Choices are [NUM LOCK] + [-], or [CTRL] + [F12]. The
default is [NUM LOCK] + [-].
OSD Sets the language that the OSD displays in. Choices are: English,
LANGUAGE German, Japanese, Simplified Chinese, Traditional Chinese, Spanish,
Russian, and French. The default is English.
SET Sets the keyboard language mapping of the console keyboard. The
CONSOLE default is Auto. If the switch does not automatically receive language
KEYBOARD mapping from the keyboard, it will set to English (US).
SET If there is no input from the console for the amount of time set with this
LOGOUT function, the operator is automatically logged out. A login is necessary
TIMEOUT before the console can be used again.
This enables other operators to gain access to the computers when the
original operator is no longer accessing them, but has forgotten to log
out. To set the timeout value, key in a number from 1–180 minutes,
then press [Enter]. If the number is 0 (zero), this function is disabled.
Default is Off.
ACTIVATE Choices are Y (for Yes), or N (for No). When activated, the beeper
BEEPER sounds whenever a port is changed, when activating the Auto Scan
function (see F7: SCAN, page 48), or an invalid entry is made on an
OSD menu. The default is On.
–
All the ports which have been set Accessible;
–
Only those ports which have been set Accessible and
–
Only those ports which have been set Accessible
Chapter 4. OSD Operation
Function
–
Only those ports which have been
(Continues on next page.)
41