General Scanning Operations - Konica Minolta BizHub C352 User Manual

General scanning operations

Press the [Scan] key in the control panel to display the Scan mode screen. The displayed
functions and modes can be selected by gently touching the buttons that are displayed in the
screen.
Icon Name
1 Sub display area
2 [Job list] button
3 Date/Time display area
4 Message display area
5 [Program] button
6 [Group] button
7 [Address book] button
8 [Direct Input] button
9 Available memory display
10 Address number display area
11 [Scan Settings] button
Figure 25
Description
This area displays destinations, etc.
Displays jobs being performed and jobs being stored. Various
commands for checking and managing jobs are available.
Displays the current date/time.
Displays the machine status and details on operations that must
be performed.
Displays destinations that are registered in programs.
Displays destinations that are registered in groups.
Used to Search for destinations that are registered in the address
book.
Used to type in the destination when performing Scan to E-mail,
Scan to FTP, or Scan to SMB operations or to select the box
where the job is to be stored. This button does not appear if the
[Manual Destination Input] on the Security Details screen
(displayed by touching [Security Setting] on the Administrator
Setting screen) is set to "Restrict".
Shows the amount of available memory that is used during the
scanning operation.
Shows the number of specified addresses.
Used to specify scan settings.
BizHub C352 User Guide
24