Bizhub C352 Control Panel - Konica Minolta BizHub C352 User Manual

BizHub C352 Control Panel

Icon Name
1 [Power Save] key
2 Touch panel
3 [Access] key
4 [Box] key
5 [Fax] key
6 [Scan] key
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
Figure 1
Description
Press to enter Power Save mode. While the machine is in Power
Save mode, the indicator on the [Power Save] key lights up in
green and the touch panel goes off. To cancel Power Save mode,
press the [Power Save] key again.
Displays various screens and messages. Specify the various
settings by directly touching the panel.
If user authentication or account track settings have been applied,
press this key after entering the user name and password (for user
authentication) or the account name and password (for account
track) in order to use this machine. This key is also used to log off.
Press to enter Box mode. While the machine is in Box mode, the
indicator on the [Box] key lights up in green.
Press to enter Fax mode. While the machine is in Fax mode, the
indicator on the [Fax] key lights up in green.
Press to enter Scan mode. While the machine is in Scan mode,
the indicator on the [Scan] key lights up in green.
Press to enter Copy mode. (As a default, the machine is in Copy
mode.) While the machine is in Copy mode, the indicator on the
[Copy] key lights up in green.
Press to clear all settings (except programmed settings) entered in
the control panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key again.
Press to turn on/off machine operations, for example, for copying,
printing or scanning. When turned off, the machine enters a state
where it conserves energy.
Press the [Stop] key during scanning to stop the scan operation.
Press to start scanning. When this machine is ready to begin
scanning, the indicator on the [Start] key lights up in green. If the
indicator on the [Start] key lights up in orange, scanning cannot
begin. Press to restart a stopped job.
BizHub C352 User Guide
4