HP Spectre 13 x2 Pro Specification page 15

QuickSpecs
Technical Specifications
STORAGE AND DRIVES
Internal Storage
128 GB* 2.5-inch mSATA
Solid State Drive
SATA 6 Gb/s 256 GB*,
mSATA Solid State Drive
Viewing Angle
Drive Weight
Capacity
Height
Width
Interface
Performance
Logical Blocks
Operating Temperature
Features
Drive Weight
Capacity
Height
Width
Interface
Performance
Logical Blocks
Operating Temperature
Features
DA - 14690 Worldwide — Version 4 — January 10, 2014
±30° Horizontal, ±10° Vertical (minimum)
30/30/20/10 (Left/Right/Down/Up) (minimum) or
45/45/35/25 (Left/Right/Down/Up) (typical)
* All specifications represent the typical specifications provided by HP's
component manufacturers; actual performance may vary either higher or
lower
75 Grams
128 GB
0.276 in (7 mm)
2.76 in (70 mm)
SATA Gen 2
Maximum Sequential Read
250 MB/s
250,069,680
32° to 158°F (0° to 70°C) [case temp]
ATA Security; ATA-7; SATA 2.6; DIPM; TRIM
*For storage drives, GB = 1 billion bytes. Actual formatted capacity is less. Up
to 36GB of system disk is reserved for system recovery software.
Up to 10 Grams
256 GB
Up to 0.191 in (Up to 4.85 mm)
1.18 in (29.85 mm)
SATA 3 (6 Gb/s)
Maximum Sequential Read
Up to 490 MB/s
500,118,192
32° to 158°F (0° to 70°C) [case temp]
ATA Security; ATA-8, SATA 3.0; DIPM; TRIM
*For storage drives, GB = 1 billion bytes. Actual formatted capacity is less. Up
to 36GB of system disk is reserved for system recovery software.
HP Spectre 13 x2 Pro Notebook PC
Maximum Sequential Write
140 MB/s
Maximum Sequential Write
Up to 250 MB/s
Page 15