Assembly; Spice Tray Assembly - Jenn-Air 720-0164 Instructions Manual

SIDE BURNER & SIDE SHELF ASSEMBLY
Estimated Assembly Time: Approximately 10 minutes
Required Tools: Phillips Screwdriver (not included)
1. Open the grill lid and remove the side burner from the fire box.
2. The screws used to attach the side shelf and side burner are already screwed into the side of
the grill cart (top drawing). Remove the screws from the side panels.
3. Align the holes on the left side shelf with the holes in the grill cart. Insert the screws and tighten.
Note: The top two screws insert from inside the fire box, while the bottom two screws insert
from under the left side shelf.
4. Repeat steps 2 and 3 to install the right side burner to the right side panel.
Secure the bottom two
screws from below the
side shelf.

SPICE TRAY ASSEMBLY

Insert the tabs on the spice tray into
the holes on the left door of the grill.
Secure the top two screws
from inside the fire box.
6
Secure bottom screw from
below the side shelf front
panel and side burner
control panel.