Fitting And Removal Of Base - Iiyama ProLite E2208HDS User Manual

FITTING AND REMOVAL OF BASE

The monitor is supplied complete with a stand. If you prefer to wall mount the monitor, please follow
the instructions below to remove the stand. Be sure to include the stand with the monitor if it is
necessary to return the unit.
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
P u t a p i e c e o f s o f t c l o t h o n t h e t a b l e
beforehand to prevent the monitor from being
scratched. Lay the monitor fl at on a table with
front face down.
The Stand-Bottom is pulled up as shown in the
fi gure.
Install the Stand-Base to the Stand-Bottom.
<Remove>
P u t a p i e c e o f s o f t c l o t h o n t h e t a b l e
beforehand to prevent the monitor from being
scratched. Lay the monitor fl at on a table with
front face down.
Hold down the hooks outside and pull the
Stand-Base away from the Stand-Bottom.
5 BEFORE YOU OPERATE THE MONITOR