Fitting And Removal Of Base - Iiyama ProLite T2452MTS-B5 User Manual

FITTING AND REMOVAL OF BASE

CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
Use 'thumb screw' provided to secure base to monitor column.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
Stand-Base
Thumb screw for Stand-Base fi xing
BEFORE YOU OPERATE THE MONITOR 7