Fitting And Removal Of Base : Prolite Xub2793Hsu / Prolite Xub2793Hs - Iiyama ProLite XUB2793HSU User Manual

FITTING AND REMOVAL OF BASE :
ProLite XUB2793HSU / ProLite XUB2793HS
 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the Stand-Base as shown on below picture.
Tighten the 'thumb screw' to secure the Stand-Base to the monitor.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the 'thumb screw' to remove the Stand-Base from the monitor.
Stand-Base
Hook
Stand-Base
Thumb screw for Stand-Base
BEFORE YOU OPERATE THE MONITOR 7