Fitting And Removal Of Base - Iiyama ProLite XUB2796QSU User Manual

FITTING AND REMOVAL OF BASE

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Combine the Stand-Neck and the Stand-Base.
Use the 'thumb screw' provided to secure the base
to the Stand-Neck.
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the Stand to the monitor
until it clicks to secure.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the 'thumb screw' to remove the Stand-Base from the Stand-Neck.
Press the hook on the back of the monitor and remove the Stand-Neck from the monitor.
6 BEFORE YOU OPERATE THE MONITOR
Thumb screw for Stand-Base fixing
Hook
Stand-Neck
Stand-Base