Fitting And Removal Of Base : Prolite B2283Hs - Iiyama ProLite E2283HS User Manual

FITTING AND REMOVAL OF BASE : ProLite B2283HS

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Stand-Base
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the Stand-Base as shown on above picture.
Use the 'thumb screw' provided to secure the Stand-Base to the monitor.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the 'thumb screw' to remove the Stand-Base from the monitor.
Hook
Stand-Base
Thumb screw for Stand-Base fixing
BEFORE YOU OPERATE THE MONITOR 7