Icom IC-R6 Instruction Manual page 17

t VSC ICON (p. 52)
Appears while the VSC (Voice Squelch Control) function
is in use.
y AUTO WRITE CHANNEL ICON (p. 34)
Appears when an auto write channel is selected.
u SKIP ICONS
While in the VFO mode
m
"PSKIP" appears when the VFO skip scan setting is
ON.
While in memory mode
m
➥ "SKIP" appears when the selected memory channel
is specified as a skip channel.
➥ "PSKIP" appears when the displayed frequency is
specified as a skip channel for the memory scan or
skip frequency for the VFO scan.
i PRIORITY WATCH ICON (pp. 39, 40)
Appears while priority watch is in use.
o MEMORY ICON (pp. 9, 18)
Appears when the memory mode is selected.
!0 MEMORY CHANNEL NUMBER
Shows the selected memory channel number. (pp. 9, 18)
!1 SIGNAL STRENGTH INDICATOR (p. 13)
Shows the relative signal strength while receiving signals.
(p. 29)
(p. 35)
PANEL DESCRIPTION
!2 ATTENUATOR ICON (p. 15)
Appears while the RF attenuator is in use.
!3 RECEIVE MODE ICONS (p. 14)
Shows the selected receive mode.
• FM, WFM and AM modes are selectable.
!4 VOLUME EXCHANGE ICON (p. 58)
Appears when the function of [DIAL] and [p]/[q] are
exchanged.
!5 FREQUENCY READOUT
Shows a variety of information, such as the operating fre-
quency, Set mode contents, memory names.
• The smaller "75," "50" or "25" to the right of the frequency read-
out shows the 0.75, 0.5 or 0.25 kHz, respectively.
• The decimal point blinks during a scan.
1
1
4