Set Mode; General; Quick Set Mode Operation; Initial Set Mode Operation - Icom IC-706MKIIG Instruction Manual

7
I
Set mode is used for programming infrequently
changed values or conditions of functions. The IC-
706MKIIG has 2 separate set modes: quick set mode
and initial set mode.
D
➀
While power is ON, push [DISPLAY] for 2 sec.
• Quick set mode is selected and one of its items appears.
•Quick set mode items vary depending on the operating
mode (SSB, FM, etc.) selected.
➁
Push [MENU] one or more times to select the
desired item.
• [M-CH] or [Y]/[Z] can also be used.
➂
Rotate the main dial to set the values or conditions
for the selected item.
➃
Repeat steps ➁ and ➂ to set other items.
➄
To exit quick set mode, push [DISPLAY] momentar-
ily.
D
➀
Push [POWER] for 2 sec. to turn power OFF.
➁
While pushing [LOCK] push [POWER] to turn
power ON.
• Initial set mode is selected and one of its items appears.
➂
Push [MENU] one or more times to select the
desired item.
• [M-CH] or [Y]/[Z] can also be used.
➃
Rotate the main dial to set the values or conditions
for the selected item.
➄
Repeat steps ➂ and ➃ to set other items.
➅
To exit initial set mode, push [POWER] for 2 sec. to
turn power OFF.
➆
Push [POWER] to turn power ON again.
•The conditions selected in initial set mode are now effec-
tive.
47
[POWER]
[M-CH]
[MENU]
[DISPLAY EXAMPLE: QUICK SET MODE]
USB
S1 3 5 7 9 20 40 60dB
P 5 10
O
Item number
[POWER]
[M-CH]
[MENU]
[DISPLAY EXAMPLE: INITIAL SET MODE]
Item number
Main dial
[Y]
[Z]
[DISPLAY]
Value or
condition
Item
Main dial
[Y]
[Z]
[LOCK]
Value or
condition
Item