Memory And Scan Operation; Memory Channels; Memory Channel Selection; Memory Clearing - Icom IC-706MKIIG Instruction Manual

5
I
The transceiver has 105 memory channels (plus 2 call
channels). Memory mode is useful for quickly chang-
ing to often-used frequencies.
All 105 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc., in memory mode.
I
➀
Select functions.
• Push [DISPLAY] 1 or 2 times to select .
• Push [MENU] one or more times to select
➁
Push [
(F-3)
➂
Rotate [M-CH] to select the desired memory chan-
nel.
•All memory channels including blank channels can be
selected.
• [UP]/[DN] on the microphone changes the frequency.
➃
To return to VFO mode, push [
I
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
➀
Push [
(F-3)
ry mode.
➁
Rotate [M-CH] to select a memory channel to be
cleared.
➂
Push [
(F-2)
•The programmed frequency and operating mode disap-
pear and "}" appears.
➃
To return to VFO mode, push [
39
Independent transmit and receive
frequencies and one mode in each
memory channel.
1–99
In addition, tone frequencies (or
1750 Hz tone burst) can also be
stored for repeater use.
One frequency and one mode in
1A–3B
each memory channel as scan
(3 pair)
edges for programmed scan.
Same as regular, but only 144/430
C1
(144 MHz)
C2
(430 MHz) MHz band can be programmed.
] to select memory mode.
] again.
(F-3)
] in the display to select memo-
] for 2 sec. to clear the contents.
] again.
(F-3)
During split frequency operation, programmed
memory contents can be called up to the SUB readout
(dot matrix portion of the display).
[EXAMPLE]: Selecting memory channel 17.
CW
.
USB
USB
USB
Yes Yes
Yes Yes
Yes Yes
VFO A
CH
F-3
M-CH
CH
MEMO
SPLIT
CH
MEMO
CH
MEMO
F-2
BLANK
MEMO CH
Yes
No
No
SHIFT
SPLIT
Push for
2 sec.