Icom IC-M801E Instruction Manual page 40

8
WHEN RECEIVING A CALL
D Distress relay call operation— continued
t Select the nearest coast station code, then push
[ENT].
• Use [CH] to select the coast station code when pre-pro-
grammed.
Ç
• When "
code (last 7 digits only) via the keypad.
- The first 2 digits "00 (double zero)" are fixed for the
coast station code.
y Rotate [CH] to select the distress call to be re-
layed, then push [ENT].
• The ship's ID of the distress call will not be displayed once
24 hours has passed after receiving the distress call.
Ç
• When "
tress via the keypad manually.
- The distress relay call can be made without an ID, if
the ship's ID is unknown.
u Rotate [CH] to select the nature of distress, then
push [ENT].
Ç
32
" is selected, enter the desired
" is selected, enter the ship's ID in dis-
i Verify the position and time of the ship's in distress,
then push [ENT].
• When the position or time requires a change, use the
keypad and [CH] for settings.
• [CH] moves the cursor.
o Rotate [CH] to select the desired calling frequency,
then push [ENT].
Ç
!0 The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CALL] for 1 sec. to transmit the call.
• Distress relay call should be transmitted after 5 minutes
or more has passed from receiving the distress call. If
the distress relay call is made within 5 minutes from re-
ceiving the distress call, the message "Alert should be
answered by coast station. Please wait a few minutes."
is displayed after pushing and holding [CALL] for 1 sec.
!1 After sending the call, the transceiver selects the
set traffic frequency automatically.