Icom IC-M801E Instruction Manual page 35

• When " " is selected, enter the desired
transmit and receive call frequency via the keypad.
o The calling stand-by screen is displayed as follows,
verify the calling condition then push and hold
[CALL] for 1 sec. to transmit the telephone call.
• Push and hold [ENT] for 1 sec. to store the calling con-
dition into the TX memory as described in pages 22 and
37, if desired.
!0 When the telephone call is succeeded, the follow-
ing screen is displayed.
• The transceiver repeats DSC transmissions and recep-
tions until the frequency, which stable communication
can be made, is found.
• The transceiver selects the communication frequency,
specified by the coast station, automatically.
• When the telephone call is unsucceeded, "Can't con-
nect" screen is displayed as below.
!1 Communicate normal way.
• Push and hold [PTT] to transmit; release [PTT] to re-
ceive.
!2 When the communication is finished, push
[FREQ/CH].
• The transceiver sends and receipts the DSC call for dis-
connecting the communication.
!3 After the disconnection, the communicated time is
displayed as below.
CALL PROCEDURE
7
7
27