Furuno CH-250 Operator's Manual page 4

CAUTION
Do not exceed 20 knots when operating
the equipment and do not exceed 15
knots when lowering or raising the
transducer.
The transducer may become damaged.
Do not use the equipment for other
than its intended purpose.
Use of the equipment as a stepping stool,
for example, may result in personal injury
or equipment damage.
Warning labels are attached to the
display, transceiver and hull units. Do
not remove the labels. If a label is
missing or illegible, contact a FURUNO
agent or dealer.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
Moving shaft can pinch and cut.
Keep hands clear while operating.
Lockout power before servicing.
Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230
DISPLAY UNIT,
TRANSCEIVER
UNIT
Name: "Finger Catch"
Warning Label
Type: 06-021-4015-0
Code No.: 100-281-590
HULL UNIT
CAUTION
WORKING WITH THE SONAR OIL
Precautions
Keep oil away from eyes. Wear pro-
n
tective gloves when working with the oil.
The oil can cause inflammation of the
eyes.
Do not touch the oil. Wear protective
n
gloves when working with the oil. The
oil can cause inflammation of the skin.
Do not ingest the oil. Diarrhea and
n
vomiting may result.
Keep the oil out of reach of children.
n
Emergency procedures
If the oil enters eyes, flush with clean
n
water about 15 minutes. Consult a
physician.
If the oil is ingested, see a physician
n
immediately.
Disposal of oil and its container
Dispose of oil and its container in accord-
ance with local regulations. For further
details, contact place of purchase.
Storage
Seal container to keep out foreign material.
Store in dark, cool place.
TFT LCD
The high quality TFT (Thin Film Transistor)
LCD displays 99.999% of its picture ele-
ments. The remaining 0.01% may drop out
or light, however this is an inherent property
of the LCD; it is not a sign of malfunction.
ii