Furuno CH-250 Operator's Manual page 114

Scanning Angle
Scanning Center
Scanning Step Angle
Time to Train
4.7 Transceiver Beam Width
(-3 dB)
4.8 Allowable Ship's Speed
4.9 Stabilizer
5 I/O INTERFACE
5.1 Data format
5.2 Input
5.3 Output
6 POWER SUPPLY
6.1 Display Unit/ Control Unit/ Transceiver Unit
6.2 Hull Unit
6.3 Rectifier (option)
7 ENVIRONMENTAL CONDITION
7.1 Ambient Temperature
7.2 Relative Humidity
7.3 Water proofing
(IEC 60529)
8 COATING COLOR
8.1 Display Unit/ Control Unit
8.2 Transceiver Unit
6 to 180 , 12 step
0 to 180 , 6 step
Normal: 3 , High speed: 6
360 , 6 step
Frequency Vertical
60 kHz: 12
88 kHz: 9.5
150 kHz: 6.5
20 knot or less (15 knot during raise/lower operation)
Within 30 , optional motion sensor or clinometers required
IEC61162-1 (NMEA0183 Ver 1.5/2.0)
DBS, DBT, DPT, GGA, GLL, HDG, HDM, HDT, MDA, MTW, RMA,
RMC, VDR, VHW, VTG
SSTLL
12-32 VDC: 4.7-1.8 A, within 58 VA
12/24-32 VDC: 4.7/2.3-1.8 A, within 58 VA
Max. 16.7/8.2-7.7 A, within 200-246 VA
110/220 VAC, 13 A, 1 phase, 50/60 Hz
-15°C to +55°C (Soundome: 0°C to +35°C)
95%
Display/ Control unit: IPX5
Transceiver unit/ Hull unit: IPX2
Panel: N3.0, Chassis: 2.5GY5/1.5
N3.0
SP - 3
Horizontal
15
11.5
6.5
E1316S01G