France; Spain - Peninsula; Spain - Canary Islands; Germany - FUNAI TD6D-D4413DB Owner's Manual

Auto Tuning (DVB)
DVB
You can programme the tuner to scan only the DVB channels
that you can receive in your area.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Channel" using [K L], then press
[ENTER OK].
3
Select "DVB Channel Setup" using [K L], then
press [ENTER OK].
4
Select "Auto Tuning" using [K L], then press
[ENTER OK].
The unit will start storing channels available in your area.
DVB Channel Setup
Edit Channels

Auto Tuning

Manual Tuning

Signal Information
The tuner scans and memorises all the active DVB
channels (TV / Radio) in your area.
Channel Search
S.No. TV Channel
14 E4
13 More4
32 Film4+1
28 ITV4
75 CITV
34 SETANTA SPORT
Channel 69 UHF
Progress
Exit
OK
5
Press [ENTER OK] to exit.
• After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
• You can use [PROG.
channels.
Note
• If you press [RETURN BACK] or [SETUP] during the
scanning, auto tuning will be cancelled.
S.No. Radio Channel
102 Teletext Cars
729 RadioMusicShop
728 Heart
858000KHz/8M
100%
RETURN Back
] to change the DVB
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and individually.
1
Follow steps 1 to 3 in "Auto Tuning (DVB)" on
page 23.
2
Select "Manual Tuning" using [K L], then
press [ENTER OK].
3
Select your desired position number using
[K L], then press [ENTER OK].
Channel Auto
• The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
• When "Auto" is selected, the unit will search for the
channels which have not been stored in channels
memory.
4
Press [SETUP] to activate the setting.
Service Update
DVB
This unit has "Service Update" function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.

Country Setting

DVB ANALOG
You can set the country for receiving your local channels
properly. This setting is mainly for digital channels.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Channel" using [K L], then press
[ENTER OK].
3
Select "Country" using [K L], then press
[ENTER OK].
4
Select your desired country using [K L], then
press [ENTER OK].
Country

France

Spain - Peninsula

Spain - Canary Islands

Germany

Italy

Switzerland

Czech Republic

Other

Digital channels cannot be received properly for the
countries not listed above.
In such case, select "Other".
5
Press [SETUP] to exit.
23
EN