Fujitsu Siemens Computers LIFEBOOK B Series Operating Manual page 49

Floppy disks
To remove a diskette:
Ê
Make sure that the diskette drive indicator is off.
Ê
Press the eject button and slide the diskette out of the drive.
Diskettes are also sensitive to electromagnetic emissions. You should avoid passing them through
x-ray machines and metal detectors in flight terminals, and have them hand-checked if possible.
1
1 = Insertion direction
2 = Label area
3 = Write-protect slider
Ê
To insert a floppy disk, push it into the drive in the insertion direction until it engages. The label
should be facing upward.
The write-protect slider enables you to protect the data on the floppy disk from inadvertent
overwriting or deletion.
Ê
To protect the data on the floppy disk from being overwritten, push the write-protect slider to
position (5). The hole is now visible.
To remove write protection, push the slider to position (6). The hole is now covered.
A26391-K105-Z120-1-7619
2
3
Connecting external devices
4
5
4 = Hole for recognition of 1.44 Mbytes disk
5 = Floppy disk is write-protected
6 = Floppy disk is not write-protected
6
41