Touchpanel; Using The Touchpanel; Calibrating The Touchpanel - Fujitsu Siemens Computers LIFEBOOK B Series Operating Manual

Hide thumbs Also See for LIFEBOOK B Series:

Table of Contents

Touchpanel

Use the stylus pen on the Touchpanel to move the cursor, mark elements and execute commands.

To remove the stylus pen from its holder, push the lock upwards lightly.

By default, the QuickPoint has been configured with the larger button as the primary one

(referred to as the left mouse button), and the smaller button as the secondary (right)

mouse button.

To move the cursor, drag the stylus pen across the display.

To make a selection, tap the stylus pen against the display. This is equivalent to clicking the

left mouse button.

To execute a command, tap the stylus pen against the display twice. This is equivalent to

double-clicking the left mouse button.

To drag an object, hold down the left mouse button, tap the object to be moved with the stylus

pen across the display.

Release the left mouse button to move the object.

The first time the system is used you must cal ibrate the Touchpanel.

Double-click the "Calibrate the Touchpanel" icon in the Start menu to start the calibration

utility.

The utility asks you to touch nine points on the display with the stylus pen.

Press the Enter key twice to save the results and exit. The Touchpanel is ready for use.

You need to recalibrate the Touchpanel if you change the display resolution.

A26391-K105-Z120-1-7619

Working with your notebook

Table of Contents