Connecting An External Monitor - Fujitsu Siemens Computers LIFEBOOK B Series Operating Manual

Connecting external devices
To remove the Port Replicator
Ê
Pull the release lever towards the front of your notebook.

Connecting an external monitor

An external monitor can be connected to the notebook or the Port Replicator.
Using the [Fn]
external monitor and the LCD display panel.
If your notebook is equipped with a TFT monitor, you can display the same picture on the
external monitor and the LCD display panel simultaneously.
Ê
Switch off the notebook and the external monitor.
Ê
Connect the external monitor to the VGA port on the back or your notebook.
Ê
First switch on the monitor and then the notebook.
36
[Fn] + [F10] [F10] key combination you can switch back and forth between the
[Fn] [Fn] [F10] [F10]
Connecting an external monitor
A26391-K105-Z120-1-7619