ShoreTel ShorePhone IP 230 User Manual page 26

To program the custom buttons, follow the procedure below:
NOTE Contact your system administrator to verify that you have permissions
to configure the programmable buttons on your phone before
proceeding.
Step 1
Step 2
Step 3
Step 4
Step 5
NOTE Your choices are limited to just Call Appearance and Dial
Number (i.e. Speed Dial) when programming the buttons via the
interface. To program one of the other functions to your custom
buttons, please contact your system administrator, as all other
functions must be programmed via ShoreWare Director.
Step 6
Step 7
Step 8
When in alphabet mode, press the appropriate key on the dial pad
NOTE
multiple times to scroll through the alphabet letters associated
with that key. Example: For the letter 'C' you would press the #2
digit three times on the dial pad.
Step 9
Step 10
26
Press the Options button
and then .
Scroll through the list to option 4. Program Buttons, or press
4 on the keypad.
Press the Edit soft key.
Press the custom button that you would like to program.
Scroll through the list of functions until you find the
function that you would like to apply to this button.
When you have highlighted the desired function, press the
Next soft key.
Enter an extension or external number. Then, press the Next
soft key.
Press the
numeric and alphabet mode, and enter a descriptive label no
longer than five characters that will remind you of the new
function of the custom button.
Press the Done soft key.
Press the Done soft key again to store your changes.
Options
, followed by your password
soft key to shift the key pad between