Mute; Temporary Ringer Silencing; Temporary Tone Dialing; Find Handset - VTech CS6328-2 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTe/
1.
handset screen shows MUTeD for a few seconds and
appears until the mute function is turned off.
MUTE
Press MUTe/
2.
The handset screen temporarily shows
MICrOPhONe ON.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset or telephone base without disconnecting the call. The next call rings
normally at the preset volume.
To silence the ringer of the handset:
Press OFF/
•
CLeAr
and show on the screen.
To silence the ringer of the telephone base:
/VOL - to turn off the base ringer.
• Press

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.

Find handset

Use this feature to page all system handsets.
Press /FIND hANDSeT on the telephone base. All idle
1.
handsets ring and the screens show ** PAGING **.
2. To end paging, press
) on the handset, or press /FIND hANDSeT on the
TONe
telephone base.
Paging rings all the registered handsets even if the ringer
volume is set to off.
reMOVe
again to resume the conversation.
reMOVe
or MUTe/
reMOVe
.
TONe
/
FLASh
on the handset. The
, rINGer MUTeD
, , any dialing keys (0-9, #,
20
MUtED
3:15 MUTE 12/25
PM
RINGER MUtED