Environmental Requirements - Smart Technologies SMART Board Installation And User Manual

Environmental Requirements

Before installing your SMART Board interactive display frame, review the following
environmental requirements.
Environmental Requirement
Operating Temperature
Storage Temperature
Humidity
Water and Fluid Resistance
Electrostatic Discharge (ESD)
Conducted and Radiated Emissions • FCC part 15 Class A
Flammability Rating
Quality Assembly
4
Parameter
41°F to 95°F (5°C to 35°C)
-40°F to 120°F (-40°C to 49°C)
5% to 80% relative humidity, non-condensing
• Intended for indoor use
• Don't pour or spray liquids directly on the electronic
components
• Designed to withstand electrostatic shock
• EN61000-4-2 severity level 3 for direct and indirect
ESD (±4 kV Contact / ±8 kV Air)
• EN55022 / CISPR 22
• KN55022
• Electronics and connectors: UL 94-V0
• Plastic enclosures, pencil ledge and other
mechanical parts: UL 94-HB
• USB 2.0 cable: UL VW-1 / CSA FT4
• All cables: IPC/WHMA-A-620 Class 2 workmanship
standards for Requirements and Acceptance for
Cable and Wire Harness
• Digital cameras, controller box and pencil PCBs:
IPC-A-610 standards for Acceptability of Electronic
Assemblies, to Class 2 specifications (Dedicated
Service Electronic Parts)
Introduction