Smart Technologies SMART Board Installation And User Manual page 15

5. To assemble the left portion of the frame, insert one of the side bezels (e) into the bottom-left
corner block (c), and then insert two pan-head screws in the bottom two holes. Slide the side
bezel into the top-left block (a), and secure it by inserting two set screws in the block.
NOTES
– Ensure that the bottom block fits securely against the front and bottom of the flat panel.
– You don't need to install set screws in the top two holes of the side bezel (e). Install the
screws in the top-left corner block (a) as directed in step 5.
e
6. To assemble the right portion of the frame, insert the remaining side bezel (e) into the
bottom-right corner block (d), and then insert two pan-head screws in the bottom two holes.
Then, slide the side bezel into the top-right block (b), and secure it with two set screws.
NOTES
– Ensure that the bottom block fits securely against the front and bottom of the flat panel.
– You don't need to install set screws in the top two holes of the side bezel (e). Install the
screws in the corner block as directed in step 6.
e
Installing Your SMART Board interactive display frame
2×
c
2×
e
b
b
a
2×
e
c
b
2×
9