Table of Contents
Advertisement
4.9
find the Handset
You can locate the handset by pressing
to the base will produce the paging tone and "PAGING" is flashing on the screen. You
can stop the paging by pressing
NOTE
If there is an incoming call during paging, paging will cease and the phone will ring with
the incoming call instead.
4.10
Make an Internal call
This feature is only applicable when there are at least two registered handsets. It
allows you to make internal calls, transfer external calls from one handset to another
handset and make conference calls. If the called handset is not answered within 60
seconds, the called handset will stop ringing and the calling handset will return to
standby mode.
NOTE:
If only one handset is registered to the base station, press
POSSIBLE".
4.10.1 call another Handset
1.
In idle mode, press
handset.
2.
Enter the desired handset number with which to connect via intercom.
3.
When the called handset rings, press
the internal call.
NOTE
If there are only two handsets are registered to the base station, press
handset will connect to the other handset immediately.
4.10.2 call all Handsets
1.
In idle mode, press
2.
Press
to ring to all registered handsets.
3.
The first handset to answer will intercom with the calling handset.
on the base. All the handsets registered
/
/
on any handset or
and the available handsets will display except the calling
or
and all registered handsets will display.
17
on the base again.
will display "NOT
on the called handset to establish
on one
Hide quick links:
Advertisement
Table of Contents
